 |
|
|
 |
• |
Thermal motor protector (TMP) |
• |
Thermal ballast protector (TBP) |
• |
Thermal cut–out (TCO) |
• |
Single–phase motors |
• |
Three–phase motors |
• |
Shaded pole motors |
• |
Permanent split capacitor motors |
• |
Fluorescent ballasts |
• |
Solenoids |
• |
Transformers |
• |
Other electrical equipment |
|
|
|
|
|
|
Sensata > Products > Klixon Brand > Motor Controls >
Klixon® 9700 series thermal protector for motors, fluorescent ballasts, temperature sensing controls
Up to 18 amps AC on–winding motor protector
| Features and Overview |
/\ Top |
|
| • |
Snap–action Klixon bimetal disc: Positive make and break is assured with proven Klixon strip disc, contact pressure at open temperature eliminates nuisance trips due to vibration |
• |
Miniature size: compact design assures ease of installation |
• |
Precision calibration: Temperature calibrated and inspected in controlled ambients for dependable consistent performance |
• |
Sealed steel case: withstands impregnation and baking, can be varnish dipped, prevents changes in calibration during installation |
• |
Options include: contact ratings of up to 18 amps for harsh environments; Mylar sleeves (shrinkable or non-shrinkable); electrical configurations, leads, and more |
• |
UL, CSA, BEAB, VDE, SEMKO certifications on 9700K model |
• |
ISO 9001 |
|
|
|
|
|
CODE: 9700 Series |
|
The Klixon 9700 protector is a field proven miniature protector developed to protect electrical equipment against overheating.
In addition to being small and lightweight, the unit is both temperature and current sensitive. Since the 9700 is sealed to withstand varnish dipping, it can be mounted directly in windings where it can best sense the true temperature of the electrical equipment. As a result, over-temperature protection is assured.
Since the case is not electrically insulated, the protector is furnished withe a durable Mylar insulating sleeve. Shrinkable and non-shrinkable sleeves are available.
|
| Performance Characteristics |
/\ Top |
|
Contact Capacity |
Thermal cut–out = 250VAC 14A
Thermal ballast protector = 250VAC 2A |
Standard Temperature Range |
Thermal cut–out = 60°C to 150°C
Thermal ballast protector = 60°C to 135°C
Thermal motor protector = 60°C to 150°C
|
Tolerance on Open Temperature |
±5K or ±8K |
Automatic Action |
Thermal cut–out = 2C
Thermal ballast protector = 2C
Thermal motor protector = 3C |
Operating Time |
Continuous |
Pollution Situation |
Normal |
Extent of Sensing Element |
Whole control |
PTI of the Insulation |
175 |
Enclosure Protection Degree |
IP00 |
|
|
Agency |
File Number |
Standard |
Note |
ENEC |
2014531.10 |
EN60730-2-2 |
Thermal motor protector |
ENEC |
2014531.10 |
EN60730-2-3 |
Thermal ballast protector |
ENEC |
2014531.10 |
EN60730-2-9 |
Thermal cut–out |
UL |
E15962 |
UL2111 |
Motor protector |
CQC0200 |
2001344 |
- - - |
- - - |
|
|
9700WXYY-ZZZZ
For more info, see the data sheet. |
9700 = device
W = open temperature tolerance
X = contact material combination
YY = operating temperature and actuation disc material
-ZZZZ = wire lead and sleeve
|
|